4 Pieces Aluminum Roof Gutter Hanger Rust Resistant Eaves Trough Hook Strong Strap Design Long Lasting for Outdoor, Shed, Gazebo
This product is a set of 5 inch aluminum roof gutter hangers supplied with mounting brackets, straps and screws. It is intended for use with 5 inch roof gutters where a strap-type hanger is needed to attach the gutter to the eaves or fascia.
Type: The set consists of hanger bases sized for 5 inch gutters, along with corresponding straps and hardware. These components are combined to create hangers that hold the gutter body while the straps extend up toward the roof, forming a mechanical connection between the gutter and the building structure.
Material: The main hanger parts are produced from aluminum alloy. This choice of material keeps the components relatively light while providing a rigid support surface for the gutter edge. The aluminum construction also pairs well with typical metal or aluminum gutters commonly installed on many buildings.
Function: When assembled, each hanger supports and positions a section of 5 inch roof gutter along the roofline. The gutter lip rests in the formed cradle of the hanger base, while the strap helps transfer load back to the mounting point. Using multiple hangers along the run of the gutter helps maintain alignment and support for the installed gutter section.
Installation: The mounting brackets and straps are manufactured with pre-formed holes so they can be secured with the included screws. During installation, the base is fixed in place, the strap is aligned to the roof or fascia, and the screws are tightened to hold all components. Additional hangers can be installed at regular intervals along the gutter according to common spacing practices, such as placing a hanger roughly every 24 inches, if desired.
Application: These hangers are intended for use wherever 5 inch roof gutters are installed and a strap-and-screw mounting method is required. They can be used on new gutter runs or when replacing worn or missing hangers on existing installations, as long as the gutter size and mounting style are compatible.
Specification
Product type Roof gutter hanger set with mounting brackets, straps and screws
Compatible gutter size 5 inch roof gutters
Material Aluminum alloy (hanger components)
Hanger base length Approx. 13.1 cm / 5.16 inch
Hanger base width Approx. 3.3 cm / 1.30 inch
Hanger base height Approx. 2 cm / 0.79 inch
Mounting method Strap and bracket fixed with screws
Size Table
Component Length Width Height
Hanger base (for 5 inch gutter) 13.1 cm / 5.16 in 3.3 cm / 1.30 in 2 cm / 0.79 in
Packaging
Item Quantity
Roof gutter hangers 4
Short roof gutter hanger bases 4
Long screws 4
Short screws 4
Assembly generally involves attaching the hanger base to the gutter edge, positioning the strap up the roof or fascia, and then securing all parts with the provided screws through the pre-formed holes. The same procedure can be repeated for each additional hanger required along the 5 inch gutter run.